Does anyone know off the top of their head if the 5500 series switches are capable of doing some ip access list. I am unable to find the correct document on the nortel site. What the end goal is, is to setup a few vlans and use the switch to route traffic between the vlans with a couple of access lists to prevent one vlan from interacting with another vlan. If someone could point me in the correct direction or document I would greatly appreciate it.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nortel 5500 Routing Switches
- Thread starter kcusscam
- Start date
- Thread starter
- #3
Thanks for the link, I believe it is what I asked for. Is it me or does the nortel stuff seem a little bit convoluted in configuring the equipment. Why would anyone ever put ip filtering commands under the qos category. ip access-list permit/deny ip any xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy seems way more logical than all the extra commands that are needed to make this work.
- Status
Similar threads
- Locked
- Question
- Locked
- Question