I updated the FW from 5.0 -> 5.1 -> 6.0 and the SW along with it.
On the last update something happened.
I've connected the ERS to a TFTP server and can reach it, also have a serial telnet session active and have the control menu active.
When I try the "d" to download a new agent, it does till the program part. When it tried to erase, a message appeared: Can't erase flash
So I tried to do a total wipe of flash with the "i" option. Both flash erases come back with the msg "Can't erase flash".
Any assistance to load a new diag or agent would be appreciated.
Thanks
On the last update something happened.
I've connected the ERS to a TFTP server and can reach it, also have a serial telnet session active and have the control menu active.
When I try the "d" to download a new agent, it does till the program part. When it tried to erase, a message appeared: Can't erase flash
So I tried to do a total wipe of flash with the "i" option. Both flash erases come back with the msg "Can't erase flash".
Any assistance to load a new diag or agent would be appreciated.
Thanks