Nortel 460 switch

[penroy]

Does anyone knows the command to setup PVID on a nortel 460 switch for a VLAN.

I am using the switch with two Vlan,one for phone and one for PC.It's geting ip address from a dhcp server.

 

[teekow]

I don't know the exact command, but if you can assign an IP address to the switch, you can then browse to the IP address with IE and it is very intuitive.

Hope this helps
Rob

 

[penroy]

Thanks alot for ur reponse, I did what u suggested and I and the command comand is there.

What I want is to just configure the PVID on the voice VLAN only. I have seen this command "vlan ports 1-11 tagging untagpvidOnly pvid 200",but it does not work on the 460 switch's