nortel 2033 polycom config

[roc221]

Morning all, config question on the 2033 polycoms. here what i have, very large conference room that one 2033 just doesn't cut the mustard . we are looking to place 3 more polycom in this rooms. here where the problem is. this conference room is for our sr mgmnt team and to make this simple as possible for them i would like to give each poly com the same dn so people at the far end of the table can hear and speak when needed . but with the ip 2033 when one ploycom pick up the other can't join on the call . is there a way to have each polycom join in the call without haveing different TN on each 2033 and one conf each of the other 2033 into the call.

 

[gwebster]

What happens if you configure all three units as SCR (Single Call Ringing)?

 

[roc221]

they all ring as normal, but what they want to be able to do if someone answer the call on polycom 1 they want to be able to press the line key on 2 and 3 and also be on that call . when i test this doesnt work , i know if i use analog polycom and i daisy chain them it will work but on ip polycom it wont work .

 

[gwebster]

They are probably configured as MCR (Multiple Call ringing). Change them to SCR (Single Call Ringing).

 

[curtismo]

Have you looked at getting the extension microphones for the 2033?

I would be afraid of feedback from one unit hearing the speaker output from another.

How big a room are you talking about? If you think you need that number of Polycoms to cover, you may want to bring in a A/V contractor that has experience with business conference room outfitting.