NORTEL 11c AREA CODES 1

[Bgarret]

I need to add area codes to the system.
Can anyone provide some info on how to do so?

 

[Telcomguy]

You define Area codes in load 90. First, print out the programming for an area code near the new one that is already programmed on your switch. Then program the new area code with the same information. In the example below I printed AC 314 and then created AC 636 with the same information.

>LD 90
ESN000

MEM AVAIL: (U/P): 1228339 USED U P: 194535 51685 TOT: 1474559
DISK RECS AVAIL: 443
REQ PRT
CUST 0
FEAT NET
TRAN AC1
TYPE NPA

NPA 1314

NPA 1314
RLI 3
SDRR NONE
ITEI NONE


MEM AVAIL: (U/P): 1228339 USED U P: 194535 51685 TOT: 1474559
DISK RECS AVAIL: 443
REQ NEW
CUST 0
FEAT NET
TRAN AC1
TYPE NPA

NPA 1636
RLI 3
SDRR
ITEI

NPA