Nortel 0x32 ? 4 wire E&M Tie to new BCM

[pbxkeyguy]

Customer has Norstar 0x32 they want to expand and open another
office. They want to keep the 0x32 in one location and install
a new phone system in the second office and tie them together.
Does Norstar support T1 Tie lines like 4 wire E&M trunks or
does Tie lines need to be copper ? Also will a BCM work with Tie
lines with 0x32 ?

 

[luv2ski]

Are u asking if you can use a point to point T1? then yes

6 months until ski season starts...sadly i must resign myself to the warmer weather"this will include a normal 8-5 work day, 5 days a week"

 

[Firebird Scrambler]

The BCM system doesn't support analogue tie lines.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[curlycord]

For 0X32 a PRI card and PRI Enabler key code required unless they have PRI already.
The Norstar Installer Guide has a good chart on this.



=----(((((((((()----=
curlycord

http://www.curlycord.com