Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Norstar System with Meridian Terminals

Status
Not open for further replies.

12Counter21

Technical User
Nov 6, 2002
1
CA
Hello

Does anyone know how to restrict all outgoing calls for a specific line on a terminal, but still allow incoming calls on that same terminal to be answered?

Thanks in advance

John
 
You need to set up a line per set filter to restrict all outgoing calls on a specific line for a specific phone. It will not affect incoming calls and the user will still be able to answer calls on the restricted line. Brian Cox
J & J Communications
brian@jandjcommunications.com
 
Go into programming Feature * * 266344 Password: 266344
Terminals&Sets - Press the upper right button that has lit up in your display.
Show set: ___ - Enter the extension number you want to program. i.e., 223
223:223 - Press the upper right button again
Line access - PRess the lower right button until you see
Restrictions - Upper right button
Restrn Filters - Upper right
Show Filter: 05 - This being a filter you probably do not have in use.
Restrn flt 05 - Upper right
No restrictions - Press Add
Restrn 01: - Dial 1 then press the ANY button in the display
Then press OK
Restrn 01:1*> - Press ADD
Restrn 02: - Dial 2 then ANY then ok
Press ADD - Dial 3 ANY OK
Continue to ADD 4ANY, 5ANY,6ANY,7ANY,8ANY,9ANY
Press the upper left button
Restrn flt 05 - Header
Restrn flts - Lower right button
Set Restrns - Lower right
Line/ set rstrns - Upper right
Show line: ___ - enter the line number you want to restrict from this phone.
Line049:Line049 - Upper right
Normal: None - Press Change and enter 05.

This phone is now restricted from making any calls out on that one specific line. MRoberts
mroberts@americaii.com

If you find a tip helpful, please mark it as such.
 
Mel, for a shortcut in building Filter 05 you could just enter ANY ANY ANY as Restriction 01. Then assign it to sets that need the restriction as you outlined.
DueE
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top