Norstar System - Unable to dial long distance

[Bondojordo]

Howdy.

I have a Norstar NNTM0408IMPV, NT5B01FD-96, MFG 960812, REL 02B
With about 5 M7208 phones.

Some of the phones are currently unable to dial long distance.
When I dial 9 then 1 and the area code, I immediately receive the fast busy signal.
There is one phone that can dial long distance, so I know it is not a carrier issue.

Normally I would go into the admin programming and assign the 00 filter to all lines, which I have,
But the issue still remains.

Noticed while I was in the programming, I wasn't able to scroll the station lines like I normally can.
Instead, I had to enter them manually in order to view its options.
Thought that might mean this is an older system with another way to unblock long distance.

Any ideas?
Any help would be greatly appreciated.

Thanks!

 

[bignose21]

You could ask the question in the Norstar forum (

http://www.tek-tips.com/threadminder.cfm?pid=799

)

But from what i remember cant you copy the restrictions from one phone to another under termials&sets/restictions something to do with the filter assigned to the set. Seem to remember filter 00 is completely unrestricted.

Long time since i touched one so scratching the grey matter a bit here.