Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Norstar MICS date changing when the incoming CO line rings

Status
Not open for further replies.

wirednet

Technical User
Apr 7, 2005
108
US
My customer has a Nortel MICS the changes date when the 1st CO line rings. It alters the date completely, no idea why. I changed out everything except the call pilot vm, replacing MICS ksu, caller ID card, 7.1 software. It still changes the time on incoming calls. I plan on checking the call pilot next but is there anything that would cause this from the CO line? It is the regional cable company. The only digital feature that I am aware of to interact on the analog line is disconnect supervision. Any insight would be appreciated.
Thanks
 
Well, you did not need to do all that.....
It changes the date because you have Auto Time & Date enabled in system programming/feature settings.
The carrier sends the time with the CLID, I guess the carrier is having issues with the time.

Turn the setting to Manual and train them on Feature **TIME for when needed such as a power outage.


small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Checked with the carrier but no solution. This is the first time I had run into this. You were correct curly cord. Changed in System Programming/ Feature Settings.
Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top