Norstar MICS and ATT IP Flex Compatablilty

[333zzz]

We have a Norstar MICS with a NT7B74GA-93 Digital Trunk Interface Card connected to a PRI circuit and are about to switch to
ATT IP Flex. They are asking if it is a TDM PRI. That should work with our system shouldn't it?
The phone system settings are:
System: Nortel MICS

Cd1-KSU: PRI
Card Type: PRI
Lines: 001-023 Only using (1-12)
Protocol: NI-2
BchanSeq: Descend
CO fail: TIA-547A
I/F Levels: ISDN
Framing: ESF
Internal CSU: On
CSU Line Bld: 0
Line Coding: B8ZS
Clock Src: Primary
Rec'd Length: 3
DN Length: 3

Cd2-KSU: Loop
Card Type: Loop
Lines: 025-028

Any help would be appreciated!

 

[norstarboy125]

Yes it should work.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer

 

[333zzz]

Thanks norstarboy125