I have a Norstar MICS 6.1 software that currently has one working PRI. I need to add another PRI to the system for site to site 4 digit dialing. We have the PRI card but do I require another PRI enabler code for this new PRI or is the enabler that is currently installed a system wide PRI enabler. In a short, do I need 2 PRI enabler key codes for 2 PRI cards. I searched the Norstar docs and couldnt find this anywhere. Thank You
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Norstar MICS 6.1 - Do I need a PRI enabler keycode for each PRI in the system
- Thread starter cynlaw1
- Start date
- Status
Similar threads
- Locked
- Question
