Norstar MICS 0X32 Zone Paging 2

[Jaird1]

I am looking to hook up a TOA M9000 paging unit to a Mics so that we can ring access the unit & have DTMF dial through so we can get to different zones. TOA says we need ringing & said to hook it to a spare trunk position. Can you help me with the configuration so we can dial access from any local to this unit.

 

[Opus35]

Just install the pair from the paging unit to one of the incoming lines (line 4 if the first 3 are being used) and then give all users access to that line.

 

[RikRodgers]

Assign the line to an unused pool, give the pool an access code (let's say x), and give the sets access to that pool.

Program the Page button as F64x, and train your users to press Page, followed by the zone digit.