Norstar FlashTalk terminal password ? 1

[MontrealSoft]

If I have a terminal plugged in the NAM serial port, I see the diagnostics at startup, but at the end, I see a "Password:". I have a light guess that that would let us configure the same options, but in a terminal format, or better yet, configure more options ?

Does anyone have access to the requested password ?
I tries 266344, Admin, Norstar, ACCESS, 120000, and a bunch of others...

Luc

MontrealSoft.com

http://www.montrealsoft.com

 

[sprucegrover]

All upper case SYSMGR

 

[MontrealSoft]

Great !!!
Thanks, I'm very surprised someone actually has the information.

It works great thank's again.

MontrealSoft.com

http://www.montrealsoft.com

 

[winmar]

AND REMEMBER TO LOG OUT WHEN YOU FINISH PGM. OR ELSE IF YOU TRY TO LOGIN FROM A PHONE SET AS THE ADMIN IT WILL SAY SYSTEM IN SERVICE SOME THING LIKE THAT.

 

[MontrealSoft]

Great thanks.
I see in the rom cartridge prompts that no menus gives me access to, so there is probably another password besides SYSMGR that can be used to configure "advanced settings", but I guess probably only norstar designer have access to those...

Still, I will certainly use that SYSMGR in the future, it's quite interesting. (and log off after my session!)

Luc

MontrealSoft.com

http://www.montrealsoft.com

 

[curlycord]

Flash is very limited when doing a telnet session however the NAM gives you more power/options.

 

[MontrealSoft]

Well, I see a list of options in the ROM that I can't find through the sets nor through terminal, and since the software used won't fit any other system besides flash, I assume we don't have the tools/knowledge needed to get access to them, yet they seems quite a bit technical, probably of no value for us besides curiosity.

Now that I read correctly, what I see mostly seems programmer comments left in the flash 1.9 software...

* 6. Trunk starts at 1 (Always. No exceptions)
* 7. Always remember that a field added can be used by different modules.
* Please comment the value if not obvious (e.g Field Position in a
* Fump can be viewed differently depending at where in the Fump you
* start counting
*
* 8. The FUMP_LOAD field is a mapping of the tSWVersion structure.
* It is a string where 0 means the boolean part of the structure is
* not set and 1 means it is set. The mapping to tSWVersion is:
* FUMP_LOAD [ 0 ] = Compact
* FUMP_LOAD [ 1 ] = GPR07Base FUMP_LOAD [ 14 ] = NA_Load
* FUMP_LOAD [ 2 ] = GPR03Base FUMP_LOAD [ 15 ] = UK_I420Load
* FUMP_LOAD [ 3 ] = GPR02Base FUMP_LOAD [ 16 ] = UK_DASS2Load
* FUMP_LOAD [ 4 ] = GPR01Base FUMP_LOAD [ 17 ] = UK_ENETLoad
* FUMP_LOAD [ 5 ] = DR7Base FUMP_LOAD [ 18 ] = UK_DR4Load
* FUMP_LOAD [ 6 ] = DR6Base FUMP_LOAD [ 19 ] = UK_DR3Load
* FUMP_LOAD [ 7 ] = DR5Base FUMP_LOAD [ 20 ] = UK_Load
* FUMP_LOAD [ 8 ] = DR4Base FUMP_LOAD [ 21 ] = GERMP1_Load
* FUMP_LOAD [ 9 ] = DR3Base FUMP_LOAD [ 22 ] = US_BASICLoad
* FUMP_LOAD [ 10 ] = DR2Base FUMP_LOAD [ 23 ] = AUSTRP1_Load *not used*
* FUMP_LOAD [ 11 ] = SWED_Load
* FUMP_LOAD [ 12 ] = NA_DR6CtxLoad
* FUMP_LOAD [ 13 ] = NA_CtxLoad
*
* Note: AUSTRP1_Load is no longer used in the code.
*
* 9. To calculate the number for L_APP_ATOM_SIZE, first take the MAX_LINES
* field and divide it by 8. Second if there is a remainder, then add 1.
* Third if the number is odd then add 1 more. Another way of looking
* at it is: what is the number of 16-bit words required to store
* MAX_LINES...then multiply that number by 2 to get a measure in bytes.
* This is the most efficient calculation. Any greater size wastes memory.
* MAX_LINES 79, 80 and 81 would have
* L_APP_ATOME_SIZE 8, 10 and 12 respectively.
*
*10. The following four fields are 0 for any KSU < GP1. For GP1 KSUs, the
* fields are only set if the KSU has > 336 MAX_LINES (such as Australia
* phase I). The fields must always be set for KSUs >= GP2 (e.g. I420).
* i) From KSU spec, get the maximum DAI line index number
* ii) NUM_LINEINDEX_BITS2 =
-------------------------
CCR_SEM 2.0 /CcrTemp / Tree.def CcrTemp /CcrTree CcrTree r CcrInit * DoValidateTree CcrTraverseTree DoReadFileRegion DoCheckPath CcrGotoNode DoOpenNode PriAnn AltAnn DoOpenVoPlay CcrCloseNode DoCloseVoice CcrSaveNode CcrCreateNode CcrDeleteNode DoDeleteVoice CcrOpenVoice DoRecordVoice CcrCloseVoice CcrQueryTree CcrOpenTree DoOpenRead r+ DoOpenWrite DoFindTmpDir DoCopyAllVFile CcrDeleteTree CcrCreateTree DoInitFile CcrCloseTree DoCopyTree DoDeleteTmTree DoPurgeTree DoCloseCallingTree DocheckWorkingTree CcrQueryMbox rb CcrCheckTreeInUse osOpenFile #1 failure osCloseFile #1 failure osCloseFile #2 failure osOpenFile #2 failure osCreateFile failure f982.c Feature985Start Bad Application Registered! Feature9s1 Unrecognized feature code Feature9s1Start Feature903 FeatureCodeRange previously entered Feature903Start F985ResetPassword 73738767793 7373867377793 67372867 0000 F985ResetConfirm F982OpsPasswordChange F982OpsReviewAnswerLines F982OpsReviewAtdtExtension F982OpsReviewAtdtStatus F982OpsReviewBusinessOpen Feature982Start f983.c F983PromptutilEnter F983PromptutilPassword 753379 F983PromptutilPlay F983PromptutilPlayPrev PlayVoice: mAddPhraseToList failed * PlayVoice: mtPlayVoice failed F983PromptutilReview ADMDirAvail ADMGenDelivery ADMVoiceMail Feature983Start 0000000 ADMChansChange ADMChansReview ADMConfigBilingual ADMConfigChangeGLDigit ADMConfigConfirm 0000 GENERAL_DELIVERY,MB Could not create gen del mbx, resetting SYSTEM_MANAGER,MB Could not create sys mgr mbx, resetting SumApplMask = %x
bs = %x
No new codes were entered ADMConfigConfirm ADMConfigGLDigit Skipping the ADMConfigGLDigit State -- VM not enabled
ADMConfigGroupLists Skipping the ADMConfigGroupLists State -- VM not enabled
ADMConfigPrimary ADMConfigStart 266344 ADMMaintDTMFDelay ADMMaintDTMFDelayEnter ADMMaintPassword 62468 ADMLangBilingual ADMLangPrimary ADMReinstallConfirm ADMRaiseException System reset ADMReinstallStart 734678255 ADMReport ADMPrint ADMReport5Parameters ADMResetStats ADMReport5Mbox ADMVersion au du lsd ac dc lc q lf af df lu csd dsd dsde dscb mscb om omaud lmbx acd acdrt None User GList Any Guest Info Admin GenDelivery Other/Invalid False True Primary Alternate Secondary Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Sun Mon Tue Wed Thu Fri Sat usOM_NUM_MSG_REC usOM_LEN_MSG_REC usOM_NUM_MAX_MSG_RCV usOM_NUM_MSG_RCV usOM_LEN_MSG_RCV usOM_LAST_SESSION usOM_LEN_SESSIONS usOM_NUM_SESSIONS usOM_NUM_MSG_PLAY usOM_TMB_MSG_PLAY usOM_NUM_MSG_DEL usOM_TMB_MSG_DEL usOM_NUM_INC_PSWD %s
Error reading stdin.
End-of-file for stdin.
Unknown error reading stdin.
%s=[%s]
a mailbox, a group list, an external sender, an internal sender, the system, a CCR tree, an unknown address, r s d c u p m =========================================================================
FlashTalk Utility
Error (SdOpenSysDirectory,%d): cannot open System Directory.
Command? Id? Entry type? (0=None, 1=User, 2=Glist) Text Name? Mailbox type? (0=User, 1=Guest, 2=Info, 3=Admin, 4=GenDeliv) Class of Service? (1-8) DN? Password? Error (UsrAddUser,%d): could not add user &quot;%s&quot;.
Error (SdGetFirstEntry,%d): could not find user %s.
Error (UsrDeleteUser,%d): could not delete user %s.

id=%s, type=%s , dn=%s, textname=%s, type=%s
, name=%s

Cabinet name? Error (mbCreateCabinet,%d): cannot create cabinet &quot;%s&quot;.
Cabinet is not empty. Delete entire contents and delete cabinet? Error (mbOpenCabinet,%d): cannot open cabinet &quot;%s&quot;.
* Error (mbOpenFileSearch,%d): cannot open file search.
Error (mbDeleteFile,%d): cannot delete file &quot;%s&quot;.
Error (mbDeleteCabinet,%d): cannot delete cabinet &quot;%s&quot;.
Error (mbOpenCabinetSearch,%d): cannot open cabinet search.
&quot;%20s&quot; Voice Storage: %d minutes
&quot;%s&quot; %d/%02d/%02d %02d:%02d
Filename? Error (mbCreateFile,%d): cannot create file &quot;%s&quot;.
Error (mbDeleteFile,%d): canno


.............. end ..............

MontrealSoft.com

http://www.montrealsoft.com