norstar655
Technical User
Hello All,
We just move to a new location and inherited a norstar system which we're currently using. This is what we have:
Norstar Application Module 3.0.
KSU 3.0 with 6-port expansion in slot 2 and LS/DS in slot 3 and 4.
One trunk module (12x0) with LS/DS in slot 1 and DID in slot 2 and 3.
Two station module (0x16) and two ASM. I believe we have 12 trunk and 8 DID lines and these are way too many for us. Any way my questions are:
1. What are line numbers for DID and which ports are associated with all 20 lines. I just know the first 12 lines which are 1-4, 25-28 and 49-52 . If we decide to trim from 20 to 8 lines ( 4 for outgoing and 4 for DID), do we need to reprogram or just disconnect from wiring block. Also does it affect current DID users?.
2. How do we set up and program a new extension?.
Greately appreciate all the helps and thank you in advance.
We just move to a new location and inherited a norstar system which we're currently using. This is what we have:
Norstar Application Module 3.0.
KSU 3.0 with 6-port expansion in slot 2 and LS/DS in slot 3 and 4.
One trunk module (12x0) with LS/DS in slot 1 and DID in slot 2 and 3.
Two station module (0x16) and two ASM. I believe we have 12 trunk and 8 DID lines and these are way too many for us. Any way my questions are:
1. What are line numbers for DID and which ports are associated with all 20 lines. I just know the first 12 lines which are 1-4, 25-28 and 49-52 . If we decide to trim from 20 to 8 lines ( 4 for outgoing and 4 for DID), do we need to reprogram or just disconnect from wiring block. Also does it affect current DID users?.
2. How do we set up and program a new extension?.
Greately appreciate all the helps and thank you in advance.