Norstar Caller ID 3

[bescoboss]

We have a Norstar MICS. We have 2 NT5B41GA-93 trunk cards with caller ID installed. Is there a way to see caller ID on more than 1 phone . Set up ask for 1 extension only to see calls. We would like to see it on all extensions.
We have 3 lines and 8 extensions. Phones are M7310.
Thanks,
Jim

 

[Arr]

Jim,
You may use F811 to see CLID ifno on all other phones at any time once the phone starts to ring or after pickup. I'm not sure if Rls 6.1MICS has provided automatic CLID distribution to all phones as the CICS does.

Cheers
PhM

 

[cowenby]

Release 6.1 CLID display enhancements display an incoming call CLID on a telephone with activated CLID display, where a call is currently active.

Feature assignment (CLID alignment)
If you subscribe to Call Display (Caller ID) services, external calls are identified on the display of telephones which have been programmed to display CLID. Feature assignment programming allows you to customize how this information is used. Press Show and enter the number of the line you want to program with feature settings for the telephone.

Caller ID set
Caller ID set allows you to specify if a telephone displays the Call Display information when a call is ringing on an external line. After the call is answered, Call Display information is always shown at the telephone that answered the call. The Caller ID set for target lines is the same telephone that has appearance on that target line. Press CHANGE to select the setting: N (No) or Y (Yes).

Tip - In order for a telephone to display the Call Display information for calls on an external line, it must also be programmed to appear and ring or ring for that line.

- For systems that subscribe to Call Display services, Caller ID can be viewed on any telephone by entering the Call Information feature code, Feature 8 1 1. See the Telephone Feature Card or Modular ICS 6.1 System Coordinator Guide for more information.

- Call information does not automatically appear when the telephone has an Answer DN, or belongs to a Ring group activated by Ringing Service. Call information is still available for these calls by pressing Feature 8 1 1.

 

[Arr]

Thanks cowenby.

PhM