Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Norstar ATA compatibility with BCM400

Status
Not open for further replies.

jpanzer

Vendor
Jan 11, 2008
177
US
I have a question of "will this work?". I've worked on BCM before, but have never tried what I am considering doing.

I currently have an M8x24DS DR5 with several M7208, M7310, T7316, M7324, etc. phones. Also on this system are two ATA's and one ATA2 for modem, bell ringer, and alarm system.

The BCM i am looking at has a 32 digital station card in it. Question is, can I attach the ATA's to the digital station card and will they function as they do on my M8x24? Or will i need to go to an analog module in the BCM?

I am considering looking at replacing the M8x24 due to its age, and the fact that sometimes my phones go nuts and randomly reboot themselves every once in a while and then return to normal. I've had the M8x24 for about 6 years now (bought it used), and it's starting to show its age. Plus, I want to take the voice mail in-house and get away from the CO voicemail.

Thanks.
 
They work the same

ddcommllc.com
Avaya/Toshiba/SyntelSolutions

ACIS

"Will work for stars
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top