Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Norstar-Asterisk/Trixbox

Status
Not open for further replies.

mlkerby

IS-IT--Management
May 26, 2006
20
0
0
HT
I'm looking for some help to insterconnect a Norstar MICS 7.1 with a Asterisk/Tribox via PRI.
 
Yes like curly asked, what be the connection ave.? since the trixbox is true Voip, owned by Fonality by the way. but what is the connection that your probing, because to my knowledge teh trixbox dosen't handle tie lines and that may be your only way.

Disclaimer> I could be wrong
 
The Norstar and ZTrixbox are connected via PRI. The Norstar has 4 digit extension (2xxx) and the Trixbox (6XXX). When I call the Norstar from the Trixbox, I dial the 4 digit with no issue. When I dial the Trixbox from the Norstar I need the first 2 digit are dropped. The log on the trixbox shows : Accepting call from '2253' to '53'. If I dial fromt the Norstar 626253 the call goes thru. I want to be able to dial 4 digits from Norstar to Trixbox.
 
Got it to work. Needed to set Absorblength to 00 in destincation code.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top