Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations biv343 on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nokia/Checkpoint firewall

Status
Not open for further replies.

mketz

MIS
Jan 23, 2004
2
US
Hello,
I am trying to run the cpconfig command on a Nokia IP120 appliance and am getting the following errors:

Which Module would you like to install ?
-------------------------------------------
(1) VPN-1 & FireWall-1 Enterprise Primary Management and Enforcement Module
(2) VPN-1 & FireWall-1 Enforcement Module
(3) VPN-1 & FireWall-1 Enterprise Primary Management

Enter your selection (1-3/a-abort) [1]: 2
ld.so failed: Undefined symbol "_FwSetCrldpInitialized" in cpprod_util:cpprod_ut
il
ld.so failed: Undefined symbol "_FwSetCrldpInitialized" in cpprod_util:cpprod_ut
il
ld.so failed: Undefined symbol "_FwSetCrldpInitialized" in cpprod_util:cpprod_ut
il
ld.so failed: Undefined symbol "_FwSetCrldpInitialized" in cpprod_util:cpprod_ut
il
ld.so failed: Undefined symbol "_FwSetCrldpInitialized" in cpprod_util:cpprod_ut
il
ld.so failed: Undefined symbol "_FwSetCrldpInitialized" in cpprod_util:cpprod_ut
il
ld.so failed: Undefined symbol "_FwSetCrldpInitialized" in cpprod_util:cpprod_ut
il
ld.so failed: Undefined symbol "_FwSetCrldpInitialized" in cpprod_util:cpprod_ut
il
ld.so failed: Undefined symbol "_FwSetCrldpInitialized" in cpprod_util:cpprod_ut
il
ln: /opt/CPfw1-50-02/boot/modules/fwmod.3.6-FCS3.o: File exists
Would you like to install the High Availability product ? (y/n) [y] ? y
This program will guide you through several steps where you
will define your SVN Foundation configuration.
At any later time, you can reconfigure these parameters by
running cpconfig



Configuring Licenses...
=======================
cpinst: Can not execute cpconfig


What does this mean, and how can I remedy the problem? Your help is much appreciated!

Matt
 
Not sure what the cause is but the way to fix it is to remove all products from the Nokia, delete the config (/config/db/initial) and start again. Also, MD5 your .tgz image and compare it to the MD5 on the CheckPoint download site to make sure that you don't have a corrupt file.

Chris.


**********************
Chris Andrew, CCNA, CCSA
chris@iproute.co.uk
**********************
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top