Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
no telnet service nlm are loaded
- Thread starter graver
- Start date
You may want to look in your inetcfg and see if telnet has been enabled? Actually it allows a telnet session. Just verify that this is set to NO and see what happens. Chances are if you are seeing this error on your server console, it would almost sound like someone is trying to hack into the server using a telnet client. Worse case scenario, put a sniffer on the network and watch the traffic and see if there is someone in house that is trying to access the box.
Mark C. Greenwood, CNE
m_jgreenwood@yahoo.com
CNE 4.11 and CNE 5 certified. BS Degree in MIS. Working in the industry for 8 years.
I work with NT servers, NDS for NT as well.
Mark C. Greenwood, CNE
m_jgreenwood@yahoo.com
CNE 4.11 and CNE 5 certified. BS Degree in MIS. Working in the industry for 8 years.
I work with NT servers, NDS for NT as well.
- Status
Similar threads
- Question
- Locked
- Question