Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No speech when TRN an ISDN incoming call from IP to IP set on Brch-Off

Status
Not open for further replies.

Madil

Vendor
May 30, 2008
47
FR
Hello all!
Here is the site détails:
x Main office
x Branch Ofiice
x DID pri Card only for incoming call on the BO (assigned to BO IP sets)

The problem is:
1 An IP set on the BO receive a DID call
2 Call istablished
3 Set A transfert the call to set B
4 The external caller here silence, the the communication cut. The set B also can't hear the caller (Some times set B hear the external caller).
The MO is a CS1000M Cabinet R 4.00T:
Call Server/Main Cabinet
========================
DepList name: core
Filename: c:/u/patch/deplist/mcore_11.ssc
Issue: 11
Release: x2104.00t
Created: 06/11/29:08:07
Number of patches: 191
Patches Loaded: 191
Patches In-service: 191
Media Gateway/Expansion Cabinet 1
=================================
Link to the Media Gateway/Expansion Cabinet is reported down.
Media Gateway/Expansion Cabinet 2
=================================
Link to the Media Gateway/Expansion Cabinet is reported down.
Media Gateway/Expansion Cabinet 3
=================================
Link to the Media Gateway/Expansion Cabinet is reported down.
Media Gateway/Expansion Cabinet 4
=================================
Link to the Media Gateway/Expansion Cabinet is reported down.

Summary for dstat command:
+---------+-----------+-----------+-----------+-----------+-----------+
| DEPLIST |SERVER/MAIN| GW/EXP 1 | GW/EXP 2 | GW/EXP 3 | GW/EXP 4 |
+---------+-----------+-----------+-----------+-----------+-----------+
|core | INS | ERR | ERR | ERR | ERR |
+---------+-----------+-----------+-----------+-----------+-----------+
(OK:successfully processed, ---:Not performed, ERR:error occurred, FATAL:fatal

Thank you all in advance!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top