Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No speech path on BCM to BCM via the Internet using SIP Trunks at 6.0

Status
Not open for further replies.

Firebird Scrambler

Systems Engineer
Apr 7, 2003
7,205
GB
Hello everyone

I've been trying to find out if anyone has successfully been able to set up a SIP link between two BCM 50 systems at release 6.0 across the internet. I'm now OK with getting IP phones to register and give out speech OK across the net as I think the main problem was that I needed the NAT code and set up the "stun server".

With regards to SIP trunks, I've tried both public and private and I can't get speech across. Has anyone successfully managed to get it to work please?.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top