Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No Speec on Ip Phones MG300

Status
Not open for further replies.

Chamvari

Vendor
Feb 1, 2008
242
ZW
I have a serious problem, i have a IPECS MG with 3 VoIB Card 1 x Voib 24 and 2x Voib 8, i sometimes lose speech between IP Phone and SLT or Digital terminals. I have 40 Ip phones only installed in this system, my channels are split between SIP lines( 12) and rest are for VoIP networking and IP phones.
I have upgraded the cards and software to version 2.5 and still the problem still comes back. The MPB and system VoIB cards are sitting on different router or subnet with the IP phones, could it be a problem of the network or switching between two routers at the same site or i am missing some programming on the system.

Please help.

Dial Tone shoul be There
 
hi!

excuse me

where can i find software 2.5 for mg100?

thank you

bye
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top