No sound on ATI All In Wonder TV Tuner

[SimoBk]

Hi all,

I have a problem with my ATI All In Wonder 128 Pro TV Tuner. It usually works perfectly, but since I formatted my computer 3 days ago, I can't get any sound on it.

All my drivers are up to date, my sound is working for everything else. The video cable is connected to my sound card. Well, I really can't see what's happening.

Here's my configuration:

Motherboard: Asus CUSL2
Proc: PIII 733MHz
Mem: 256Mb SDRam PC133
Video: ATI All In Wonder 128 Pro (IRQ11)
Sound: SB Live Value (IRQ9 shared with modem and both LAN cards, it's always been like that but it used to work b4)
LAN+Modem: 10/100PCI - 10PCI - 56K
IDE: DVD16x - CD.RW 12.10.32 - 3½ - Master 30Gb 7200rpm - Slave 40Gb 7200rpm
OS: MS Windows XP

Thanks for your help,

Simo

 

[mainegeek]

Double check the patch cable from your video to the sound
card (sound out). Also make sure there is a volume control setup for it.

 

[SimoBk]

As I said before, the cable is well connected. The volume control is Ok... I really tried everything I could think of, and can't find the problem... :S Motherboard: Asus CUSL2
Proc: PIII 733MHz
Mem: 256Mb SDRam PC133
Video: ATI All In Wonder 128 Pro (IRQ11)
Sound: SB Live Value (IRQ9 shared with modem and both LAN cards, it's always been like that but it used to work b4)
LAN+Modem: 10/100PCI - 10PCI - 56K
IDE: DVD16x - CD.RW 12.10.32 - 3½ - Master 30Gb 7200rpm - Sla

 

[evildoughboi]

go to setup on ur ati tv tuner program, go through the initialization wizard, and on da way, choose your input. it sud be line in or mic. try that out. i have da ati all in wonder radeon and that is how u do it for that, im not sure for da 128 pro. the best of luck to ya

 

[SimoBk]

evildoughboi, thx for your answer, but I had already did that, and tried ALL the input sources (it's usually on CD Audio), but it didn't work.

I send an e-mail to te ATI tech support, but they keep sending me back the auto response saying to check the FAQ, wich I already did, with no success...

Does anyone know how we can actually reach the ATI support. I only receive auto-responses either when sending from the online form or when sending an e-mail to support@ati.com.

Thanks all for your answers,

Simo Motherboard: Asus CUSL2
Proc: PIII 733MHz
Mem: 256Mb SDRam PC133
Video: ATI All In Wonder 128 Pro (IRQ11)
Sound: SB Live Value (IRQ9 shared with modem and both LAN cards, it's always been like that but it used to work b4)
LAN+Modem: 10/100PCI - 10PCI - 56K
IDE: DVD16x - CD.RW 12.10.32 - 3½ - Master 30Gb 7200rpm - Sla

 

[apex1x]

LOL, yeh, the ATI help is a joke! I've been having a problem with my sound with my ATI TV WONDER; it keeps kicking in and out when i switch channels. Something I found weird were the drivers in device manager. Every once in a while, one of them will have a yellow exclamation mark, meaning it is not running properly, so I reinstall that driver, reboot, and its good again. Then a little while later I check and low and behold its back again. I assume this would be a potential cause of my lousy sound. You might wanna check your drivers to see how they are doing too. ~Apex1x
Sattinger's Law:
It works better if you plug it in.