no rip debug output on hub and spoke frame relay

[bongonetworker]

My home lab has a hub and spoke topology with 3x3640 routers and 2522 acting as the frame relay cloud. I have configured frame relay, tested connectivity and everything looks fine. Then I enabled rip version 2 on both routers and by the output of show ip route rip it shows that all three routers have received the rip updates. But the strange thing is when I turn on rip debug i get no output whatsoever even after 30 seconds. Have I missed anything?

 

[bongonetworker]

Please ignore this, i reloaded the routers now i can see rip debug output. Thanks.