Hello,
I have connected two sites (lets called them A & B) using a private point to point T1, the extensions on site A are 8801-8880 and the extensions on site B are 221-450, I have used the off-core DTI card on both sites and they are connected on port 8 on the ksu and configured exactly the same. I have setup target lines for each phone with there respective extension number. I have no problem making calls from one site to the other in anyway, it works fine, MY PROBLEM IS THAT I CANT GET A RING WHEN I CALLED EITHER SITE 100% OF THE TIME, if I called either site A or B about 40% of the time i will hear the phone on the other site ring and bout 60% I will just hear nothing, I know its working because someone will always pick up or it will go into the persons voicemail even if i dont hear the rings, I had had people called me from the other site and i will always hear my phone ring but the person on the other site will hear the phone ringing 4 out of 10 times they called, but i cannot get it to ring 100% of the time. Has anyone out ther had this problem before, your help will certainly be well appreciated.thanks
OTHER INFO
BOTH SITES HAVE XC 6.1
SITE A : HAS 2 PRI AND 24 ANALOG LINES
SITE B: HAS 1 PRI AND 24 ANALOG LINES
LINES
LINES 061-084
TRUNK TYPE : E&M
LINE TYPE : POOL C (LOCATION A) , POOL B (LOCATION B)
DIAL MODE : TONE
PRIMESET : NONE
DISTING RING : 2
AUTO PRIVACY: Y
ANS MODE : AUTO
ANS WITH DISA : NO
AUX. RINGER : NO
SIGNAL : WINKSTART
ANI NUMBER: NO
HARDWARE
MOD 08: TRUNKMOD
CD1-MOD8: T1
CARD TYPE: T1
LINES : 061-084
DISCON TIMER: 460
ANSWER TIMER : 2
CO FAIL: TIA-547A
I/F LEVELS : ISDN
FRAMING: ESF
INTERNAL CSU: ON
CSU LINE BLD: 0
LINE CODING: B8ZS
SERVICES
ROUTING SERVICES
ROUTE 004
DIAL OUT : NO NUMBER
USE: POOL C (LOCATION A) , POOL B (LOCATION B)
DESTINATION CODES
DSTCODE: 88 (LOCATION A) , 42(LOCATION B)
NORMAL MODE
ROUTE: 004
ABSORBLENGTH: 00
I have connected two sites (lets called them A & B) using a private point to point T1, the extensions on site A are 8801-8880 and the extensions on site B are 221-450, I have used the off-core DTI card on both sites and they are connected on port 8 on the ksu and configured exactly the same. I have setup target lines for each phone with there respective extension number. I have no problem making calls from one site to the other in anyway, it works fine, MY PROBLEM IS THAT I CANT GET A RING WHEN I CALLED EITHER SITE 100% OF THE TIME, if I called either site A or B about 40% of the time i will hear the phone on the other site ring and bout 60% I will just hear nothing, I know its working because someone will always pick up or it will go into the persons voicemail even if i dont hear the rings, I had had people called me from the other site and i will always hear my phone ring but the person on the other site will hear the phone ringing 4 out of 10 times they called, but i cannot get it to ring 100% of the time. Has anyone out ther had this problem before, your help will certainly be well appreciated.thanks
OTHER INFO
BOTH SITES HAVE XC 6.1
SITE A : HAS 2 PRI AND 24 ANALOG LINES
SITE B: HAS 1 PRI AND 24 ANALOG LINES
LINES
LINES 061-084
TRUNK TYPE : E&M
LINE TYPE : POOL C (LOCATION A) , POOL B (LOCATION B)
DIAL MODE : TONE
PRIMESET : NONE
DISTING RING : 2
AUTO PRIVACY: Y
ANS MODE : AUTO
ANS WITH DISA : NO
AUX. RINGER : NO
SIGNAL : WINKSTART
ANI NUMBER: NO
HARDWARE
MOD 08: TRUNKMOD
CD1-MOD8: T1
CARD TYPE: T1
LINES : 061-084
DISCON TIMER: 460
ANSWER TIMER : 2
CO FAIL: TIA-547A
I/F LEVELS : ISDN
FRAMING: ESF
INTERNAL CSU: ON
CSU LINE BLD: 0
LINE CODING: B8ZS
SERVICES
ROUTING SERVICES
ROUTE 004
DIAL OUT : NO NUMBER
USE: POOL C (LOCATION A) , POOL B (LOCATION B)
DESTINATION CODES
DSTCODE: 88 (LOCATION A) , 42(LOCATION B)
NORMAL MODE
ROUTE: 004
ABSORBLENGTH: 00
