Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No Ringback Tone for calls from SIP Trunk to IP Phones

Status
Not open for further replies.
ErrorMagnet

ErrorMagnet

Technical User
Mar 21, 2006
19
0
0
NO
A third party system with softphone clients is integrated to CUCM4.1 over a SIP Trunk. Calls flow pretty OK in both directions, but inbound calls from third party system to Cisco IP Phones hear no Ringback Tone. Any ideas what to check?
 
Status
Not open for further replies.

Similar threads

Gnjiro
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
0
Views
79
Gnjiro
Gnjiro
keyset6
  • Question
No transmit from new laptop microphone using Jabber
Replies
4
Views
209
keyset6
keyset6
Diya Freahat
  • Locked
  • Question
called name between avaya I P office & CUCM via SIP trunk
Replies
1
Views
76
Diya Freahat
Diya Freahat
mikedphones
  • Question
MASS - Looking for a Cisco Call Manager support tech to move and reconfigure
Replies
0
Views
86
mikedphones
mikedphones
Corneliy
  • Locked
  • Question
Forwarding calls
Replies
0
Views
71
Corneliy
Corneliy

Part and Inventory Search

Sponsor

Back
Top