Tell me if you have heard of this, We have a MICS 5.0 with a PRI circuit. If you call in on the circuit all calls go to where they are suppose to go. But the problem is that the calling party does not get a ring back tone on there end so they think the call didn't complete. Any idea?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
No ringback to calling party
- Thread starter hawks
- Start date
jerryreeve
Vendor
I would suspect the services/combo cartridge, I think that is the source for supervision tones.
JerryReeve
Communications Systems Int'l
com-sys.com
JerryReeve
Communications Systems Int'l
com-sys.com
Norstarguru
Vendor
I am pretty sure this problem lies with the bell company, The provider should be providing the supervision on this PRI since there are no settings in the Norstar for it. Let me know how this one turns out I am curious too find out what it is..
Norstarguru
john1@refurbphones.com
Norstarguru
john1@refurbphones.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question