No profile in display

[rfboy]

Hi there,

we have a MD110 BC12 system

Is it posible to turn off the display say Profile1 even if the profile is active.

thx

 

[lalrl]

give with niini a better profile-name then "Profile 1". Mabye then the user is happier.

 

[fouesnant]

Hi

Providing a name to a profile will show the name of this profile only on D4 DTS connected to ELU28/3-ELU33

 

[slash50]

You can remove the string value for IDL15

KSTSC:STRNO=IDL15,STRING="";

Or adjust the string to something more meaningfull?

But the profile number will always remain on the screen.

 

[patcher]

Okay I am assuming you have BC12 higher SP. Try this...

PCASI:UNIT=KLP1T,CI=PROFILE,REV=7-26A,IA=B232,RA=B238,BYTE=6;

CLR.B ($185,A6);
END;
!A;
PCACS:UNIT=KLP1T,CI=PROFILE;
Y;
PCCOS:UNIT=KLP1T,CI=PROFILE;
Y;

 

[Kronehead]

You can remove from screen of cordless extn by changing PARNUM 226.

PARNUM=226 Control of IDLE-display for an active RID FORMAT
PARNUM=226, PARVAL=D 1
0 IDLE-display, provided by DECT terminal itself, will be shown
1 IDLE-display provided by the system will be shown