Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
No power from HP 8500DN
- Thread starter caribcat
- Start date
ski
Technical User
- Oct 11, 2000
- 2,467
Assuming that the fans and lights do not power up:
Check for power at the wall outlet.
OK? Make sure the surge arrestor's power switch is in the ON position, and check for power at the surge arrestor.
OK? Check for power at the computer cord.
OK? Make sure the power supply's switch is in the ON position, and its voltage selector is in the correct position.
OK? Make sure the power supply's main connector is securely seated on the MB.
OK? Check for the correct voltage at the power supply's connecter-
No good? PS is bad.
OK? MB is bad.
Check for power at the wall outlet.
OK? Make sure the surge arrestor's power switch is in the ON position, and check for power at the surge arrestor.
OK? Check for power at the computer cord.
OK? Make sure the power supply's switch is in the ON position, and its voltage selector is in the correct position.
OK? Make sure the power supply's main connector is securely seated on the MB.
OK? Check for the correct voltage at the power supply's connecter-
No good? PS is bad.
OK? MB is bad.
- Status
Similar threads
- Locked
- Question
- Locked
- Question