Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

No More Connections

Status
Not open for further replies.

crmayer

Programmer
Nov 22, 2002
280
US
I have about 30 98 workstations and about 10 2K and I am getting this error on all of them about once a day now. This has NEVER happened until yesterday.
When accessing a network drive:
O:\ is not accessible.
No more connection can be made at this remote computer at this time because there are already as many connection as the computer can accept.

When printing something:
There was an error writing to \\NTserver\savin4035 for printer (Savin 4035):
No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
This printer will be set to work offline.
To save your print job in the local printer queue, click OK.

I did find an article in Microsofts Knowledge base, but it talks about NT workstations. I do not have any workstations, but I am connection to a NT 4.0 Server....

Any ideas?
 
One more thing. If I reboot the NT 4.0 server, it fixed it for the day....
 
What is the license count you have on the server?

Matt J.

Please always take the time to backup any and all data before performing any actions suggested for ANY problem, regardless of how minor a change it might seem. Also test the backup to make sure it is intact.
 
Please discontinue all posts here, the same post exists in the nt server forum.

Matt J.

Please always take the time to backup any and all data before performing any actions suggested for ANY problem, regardless of how minor a change it might seem. Also test the backup to make sure it is intact.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top