I'm new to VPN setup and I need little help from you guys.
I think I'm very close to configure my VPN. I'm running PAT on the PIX501 ver.6.2. I cannot connect to my VPN from cisco client using a dial-up. When I run "show crypto dynamic-map" this is what I'm getting back:
ixfirewall(config)# show crypto dynamic-map
Crypto Map Template"cisco" 10
No matching address list set.
Current peer: 0.0.0.0
Security association lifetime: 4608000 kilobytes/28800 seconds
PFS (Y/N): N
Transform sets={ }
Could someone explain to me where I'm making a mistake?
Thank you
PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password QB.o4qtAUf2x8nuB encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
domain-name ciscopix.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
name 192.168.1.3 MAILServer
object-group service MailServices tcp
description SMTP and Secure IMAP
port-object eq 993
port-object eq smtp
port-object eq pop3
port-object eq pop2
port-object eq imap4
port-object eq https
port-object eq www
port-object eq 1723
object-group service rdp tcp-udp host xx.xx.xxx.xxx object-group MailServices
access-list splittunnel permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.
255.0
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
mtu outside 1500
mtu inside 1500
ip address outside xx.xx.xxx.xxx 255.255.255.240
ip address inside 192.168.1.1 255.255.255.0
ip verify reverse-path interface outside
ip verify reverse-path interface inside
ip audit info action alarm
ip audit attack action alarm
ip local pool local2 192.168.2.1-192.168.2.254
pdm location 192.168.1.0 255.255.255.0 inside
pdm location MAILServer 255.255.255.255 inside
pdm location 192.168.1.200 255.255.255.248 outside
pdm location 192.168.2.0 255.255.255.0 outside
pdm location 192.168.1.4 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
global (outside) 1 xx.xx.xxx.xxx
nat (inside) 0 access-list 80
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) interface MAILServer netmask 255.255.255.255 0 0
access-group inside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 68.72.225.181 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
no sysopt route dnat
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec security-association lifetime seconds 3600
crypto dynamic-map cisco 10 set security-association lifetime seconds 28800 kilo
bytes 4608000
crypto dynamic-map dynmap 30 set transform-set myset
crypto map newmap 20 ipsec-isakmp dynamic dynmap
crypto map newmap interface outside
isakmp enable outside
isakmp identity address
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup client address-pool local2
vpngroup client dns-server 192.168.1.4
vpngroup client wins-server 192.168.1.4
vpngroup client default-domain cisco.com
vpngroup client split-tunnel 80
vpngroup client idle-time 1800
vpngroup client password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication pap
vpdn group PPTP-VPDN-GROUP ppp authentication chap
vpdn group PPTP-VPDN-GROUP ppp authentication mschap
vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto
vpdn group PPTP-VPDN-GROUP client configuration address local local2
vpdn group PPTP-VPDN-GROUP client configuration dns 192.168.1.4
vpdn group PPTP-VPDN-GROUP client configuration wins 192.168.1.4
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn group PPTP-VPDN-GROUP client authentication local
vpdn username aszygowski password ********
vpdn enable outside
I think I'm very close to configure my VPN. I'm running PAT on the PIX501 ver.6.2. I cannot connect to my VPN from cisco client using a dial-up. When I run "show crypto dynamic-map" this is what I'm getting back:
ixfirewall(config)# show crypto dynamic-map
Crypto Map Template"cisco" 10
No matching address list set.
Current peer: 0.0.0.0
Security association lifetime: 4608000 kilobytes/28800 seconds
PFS (Y/N): N
Transform sets={ }
Could someone explain to me where I'm making a mistake?
Thank you
PIX Version 6.2(2)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password QB.o4qtAUf2x8nuB encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
domain-name ciscopix.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
name 192.168.1.3 MAILServer
object-group service MailServices tcp
description SMTP and Secure IMAP
port-object eq 993
port-object eq smtp
port-object eq pop3
port-object eq pop2
port-object eq imap4
port-object eq https
port-object eq www
port-object eq 1723
object-group service rdp tcp-udp host xx.xx.xxx.xxx object-group MailServices
access-list splittunnel permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.
255.0
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
mtu outside 1500
mtu inside 1500
ip address outside xx.xx.xxx.xxx 255.255.255.240
ip address inside 192.168.1.1 255.255.255.0
ip verify reverse-path interface outside
ip verify reverse-path interface inside
ip audit info action alarm
ip audit attack action alarm
ip local pool local2 192.168.2.1-192.168.2.254
pdm location 192.168.1.0 255.255.255.0 inside
pdm location MAILServer 255.255.255.255 inside
pdm location 192.168.1.200 255.255.255.248 outside
pdm location 192.168.2.0 255.255.255.0 outside
pdm location 192.168.1.4 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
global (outside) 1 xx.xx.xxx.xxx
nat (inside) 0 access-list 80
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) interface MAILServer netmask 255.255.255.255 0 0
access-group inside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 68.72.225.181 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
no sysopt route dnat
crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto ipsec security-association lifetime seconds 3600
crypto dynamic-map cisco 10 set security-association lifetime seconds 28800 kilo
bytes 4608000
crypto dynamic-map dynmap 30 set transform-set myset
crypto map newmap 20 ipsec-isakmp dynamic dynmap
crypto map newmap interface outside
isakmp enable outside
isakmp identity address
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
vpngroup client address-pool local2
vpngroup client dns-server 192.168.1.4
vpngroup client wins-server 192.168.1.4
vpngroup client default-domain cisco.com
vpngroup client split-tunnel 80
vpngroup client idle-time 1800
vpngroup client password ********
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
vpdn group PPTP-VPDN-GROUP accept dialin pptp
vpdn group PPTP-VPDN-GROUP ppp authentication pap
vpdn group PPTP-VPDN-GROUP ppp authentication chap
vpdn group PPTP-VPDN-GROUP ppp authentication mschap
vpdn group PPTP-VPDN-GROUP ppp encryption mppe auto
vpdn group PPTP-VPDN-GROUP client configuration address local local2
vpdn group PPTP-VPDN-GROUP client configuration dns 192.168.1.4
vpdn group PPTP-VPDN-GROUP client configuration wins 192.168.1.4
vpdn group PPTP-VPDN-GROUP pptp echo 60
vpdn group PPTP-VPDN-GROUP client authentication local
vpdn username aszygowski password ********
vpdn enable outside