im running win3k and have 3 hard disk drives attached. cmos detects all 3 windows is showing all 3 in the system settings but it is only assigning letters to 2 of them. i have restarted and shut down several times but still no drive letter. everything was fine up until this morning. any ideas??thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
no letter to hard drive
- Thread starter darrenrd
- Start date
I assume you are using Win2K not 3K (unless I have missed the past 1000 years).
Go to the disk managment console & the disk should be in there. If it is coming up as unallocated the disk requires formating. If not you should be able to assign a letter to the drive by right clicking on the drives partition information & selecting Change Drive letter & Path.
Good luck
Go to the disk managment console & the disk should be in there. If it is coming up as unallocated the disk requires formating. If not you should be able to assign a letter to the drive by right clicking on the drives partition information & selecting Change Drive letter & Path.
Good luck
- Status
Similar threads
