Hi, anyone have any experience of German ISDN2 on the BCM50. I have got outgoing calls no problem but cant get any incoming. I have tried everything from 7 to 2 incoming digits sent to a target line to a desperate auto answer switched on but all I get at the exchange end is a message saying this number is not allocated even though the exchange have tested the line and say the calls are working upto the switch but are not getting through the switch. The last time I had a similar problem was with a bcm400 when someone at the BT exchange changed the number of incoming digits without telling me but at least I could use BCM monitor to see the incomng line briefly flash before the call died but the monitor on this reluctant 50 shows nothing. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
No Incoming calls on Bcm 50 using German ISDN2
- Thread starter ccnet
- Start date
Similar threads
- Locked
- Question