no free space!!

[md110user]

I have an Ericsson system Md110 BC9 consist of 11-lims and I have two Ringmasters connected with two siu boards located on lim3 & lim5. I successfully add all the routes to the first ringmaster by the command:
CLODI:FILE=RM1,DIAL=XX,TIME=00-0-24;
Where XX means the Dest of all routes on the system
When I rebeat this command to the second ringmaster
CLODI:FILE=RM2,DIAL=XX,TIME=00-0-24;
After some enteries there is a message :
“NO FREE SPACE”
Is there any limitation for the number of enteries to be add by command CLODI.

BEST REGARDS.

 

[patcher]

NO FREE SPACE respose when you initiate something means that there is no free RECORDS available in the program units. If you print CLINP; most probably you have lots of DIAL data. You had to remove some which is not used and add the one you need. You can also free up the records if you can just minimise splitting digits and instead combine them.
Example is DIAL=09123, 09124 and 09125. You can just make it DIAL=0912 and you freed at least 2 records in the software.

Hope this will help,
\\patcher