No CLID on MICS 5.0 3

[curlycord]

It's rare I run into 5.0 but also never had to replace a CLID card ever.

Lines 1 to 4 A&P on X221
Ext Message = Yes on Line 1 for X221
Lines 1 to 4 = CLID Set = 221

-When CLID does fail on a card does that go for all 4 line ports?
-Is there anything ales I am missing in programming?

Tanks
cc

________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[PERRYPJ]

I Would get on the demark with a butt set and see if you hear data between the first ring and the second if you hear it change the CLID card

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[curlycord]

Sorry I forgot to mention CLID was confirmed working at Demarc (Rogers Cable Modem) with a 500 set.

________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[exsmogger]

I know that R5.0 was short lived because it was so buggy. I'd probably take it up to at least R6.1 MR and see if that resolves the problem.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[phoneguy427]

I've had a few clid card go bad, the lines work but no caller id. Changed 2 in the last six months or so.

 

[curlycord]

Ok thanks dudes!

________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca

 

[curlycord]

Card in wrong slot, issue solved.


________________________________________

Add me to LinkedIN

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca