NNTM040 - Adding a new line

[DarkDrgn]

I have a customer that just spend a ton of money on a new telephone line.... and didn't realize they needed to wire it into the Nortel.

I have some experience with pbxes but limited of the Nortel. I know my way around the config menu but what steps need to be done to add a new line to pool on a Nortel
(they only had 2 lines to begin with)

 

[curlycord]

Go to Set programing Line Access Line Assignment and add 003 and either A&P or A Only etc.
Do that for each set needed.
In Lines go to 003 and add it to the Pool (A in most cases), als make it Disconnect Super = Y


________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.

=----(((((((((()----=

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca