NMC don`t show all devices on "devices" monitoring tab

[Masternet]

Hi, me again

NMC now don't show all devices configured con server.
My devices are:


Device type volume
/dev/nst0 (J) LTO Ultrium-3
/dev/nst1 (J) LTO Ultrium-3
rd=caburgua:/dev/nst0(J) LTO Ultrium-3
rd=caburgua:/dev/nst1(J) LTO Ultrium-3
rd=colico:/dev/nst0(J) LTO Ultrium-3
rd=colico:/dev/nst1(J) LTO Ultrium-3
rd=guaitecas:/dev/nst0(J) LTO Ultrium-3 rd=guaitecas:/dev/nst1(J) LTO Ultrium-3
rd=guamblin:/dev/nst0(J) LTO Ultrium-3 rd=guamblin:/dev/nst1(J) LTO Ultrium-3

If I run an nsrwatch command, I can view al devices


gabriel

 

[Rif123]

Hi,

What version and platform are you running on? What devices are missing from the monitor tab? One, all or all from a particular SN? Backups are working fine, but you cant see the devices? Does it look alright under sessions and the correct device there during backup?

I haven't seen that in any version of NMC. Have you tried any other version of NMC than the current you are using? Your best shot will probably be to open up a case with EMC.

 

[ratmcore]

NMC monitering of device tab is not all device

it`s only curreny running device only show

you can see all device

NMC -> DEVICE -> library -> your library name