NIU2...

[singhbrindisi]

Hi All,

1) Is it possible to download R16a FW (for NIU) on NIU2??
2) At present with CNBIP i gets the following info..

001-0-60 NIU ROF1375396/1 R3A
CAA 1580021 R2A EXE
CAA 1580001 R13A OLD

& In actual I have NIU2(ROF 1375396/2), Is this normal print or it shows something unusual....

3) If i want to swithover FW to R13A, does CNBSI / CNBCI commands will be sufficient???

<IODDP;
I/O DEVICE DATA
NODE IODEV/SUBFS BPOS/EQU I/O-BUS TYPE/USAGE STATUS AUTH
SYSN - 001-0-60 - - IN SERVICE
SYSN SYSDISK1 001-0-60-0 MASTER SanDisk IN SERVICE
SYSSUBFS11
SYSSUBFS21

I am facing two problems:
1) Not able to connect to the flash with MDDT(Sam 3.5)
2) Response from the NIU2 is quite slow, on entering the commands, after a while only i can see that it started to process them...

So will query no 1/2/3 will resolve the abovesaid two problems???/// System is BC11/sp12

Thanks & appreciate all ideas..

BR,

 

[DUFQI]

singhbrindisi
1. no
2. not unusual, latest firmware R5A
3. not possible
4. NIU2 need SAM 3.7 SP2
5. connecting to NIU2 via FTP is best done with having NIU installed in a running system (not I/O)
Greetings
DUFQI

 

[singhbrindisi]

Thanks DUFQI.....

Can anyone on this forum provide me latest FW( R5a/ R6a)....preferably without Dollars...

BR,