NIU2 flash card problem

[MDfreak]

Hello all
i have MD110 BC12 sp6 and the flash disk on the NIU board is empy, i need the procudre how to put the INL on it manually by the computer, i have access it by my PC and nothing on it.

any ideas?

 

[LME]

Hi

Connect to niu with niux
enter the following commands
You need Sam 3-7 SP3 build 8 and BC12 INL SP6


/***** Create INL with NIU2 and Flash ram **********/
niux > atinfo

niux > atfmt 0

niux > mkfs /DEV/AT01 3C00 3B00 100

niux > fsck /DEV/AT01

niux > fsinfo

niux > mount /DEV/AT01 /USR1

niux > quit

/******* Use MDDT to create INL ********/

 

[lalrl]

Isn´t it important to know, which size the flash has? Or is this procedure for all Flash-sizes the same (64MB - 256MB)?

 

[MDfreak]

thanks LME but i solve this problem through getting the INL from another system,
about ur way using niux,
where could you specify the directory.
is it the command : mkfs ?

 

[whosrdaddy]

directories can be created from ftp/mddisktool

--------------------------------------
What You See Is What You Get

 

[LME]

Hi
The partition created is less than 64mb(about 60mb) so it will work on all flash ram of 64mb and above and is enough to fit size of INL about 20mb.

It is not good practice to create a new system from an INL
extracted from another system.
You should always use an original INL from the vendor.