Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Night Service Setup

Status
Not open for further replies.

nsi1

Technical User
Nov 16, 2002
73
US
We have an M8x24DS NT5 system that seems to have ex308 locked in it's programming for night ring operation. We've checked all the admin settings that we can find, but can't find where that number is set in the system. Any Ideas.

JEB




 
Do you mean ext 308 is part of night service?
Go into service modes, press show, press next till you see Name: Night then press show, press nexttill you see show line: and enter line 1(001) then press show when it says ringing sets, press next till you see ext 308 and then press remove,press heading then enter line 2(002) and repeat above for all the lines....hope this is what you after.
spoclogo2.jpg

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top