Night ring just won't answer certain lines immedaitely.

[Phonehed]

This one is really starting to drive me nuts.

It's a MICS 7.1 with PRI, release 2 NVRAM pack with a new CP-100.

I upgraded this system last year from 4.1 and supposedly it's been working just fine all this time until they had an extended power failure after a thunderstorm last month.

I've got some 8 or 10 different main (DID) numbers assigned to night ringing and the only set in that ring group is the prime dn to vmail. Two of these numbers work just fine and get answered immediately every time but no matter what I do I can NOT get the others to pick up right away even though they are programmed the very same way.

I'm really beginning to wonder if I have some kind of software or carrier issue here.

Any ideas or suggestions?

Phonehed in Dallas

 

[curlycord]

Reinstall since storm related.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[cook1082]

Delete and remake the Target lines on different Target line numbers , they could be corupted.

 

[Phonehed]

@Curlycord,

You mean run start up to clear everything out first and then reload from the current back up or do you mean manually reprogram everything from scratch?

I'll try rebuilding the target lines on different line numbers first and thanks for the help!

Phonehed in Dallas

 

[curlycord]

Yes from scratch, its the only way to clear bugs...like re-installing windows.

=----(((((((((()----=
curlycord

http://www.curlycord.com