Ashaman074
MIS
Hi, a few months ago I installed Nfuse 1.6 on our Metaframe XP server, but I have an issue that I hoped someone could help me out with.
We have a dedicated T1 line, all office workstations are using NAT to share a single external IP. Our Metaframe server is on the same T1, but I have configured the router to use a separate direct 1:1 mappping using NAT.
I ran the Altaddr command to specify the internal/external addresses I set up for the Citrix server, and added the entry to the ICA file. Finally,I have the Citrix XML services set to share the same port as IIS.
So, at this point I go out and try it from home, everything seems to be working great. However, in trying to access from inside the office, it doesn't work....not so great
I am trying to figure out where the problem might be occurring, but am having trouble visualizing the process. I have a feeling I am missing something on the firewall setup, but if anyone has any suggestions I would appreciate it.
TIA!
We have a dedicated T1 line, all office workstations are using NAT to share a single external IP. Our Metaframe server is on the same T1, but I have configured the router to use a separate direct 1:1 mappping using NAT.
I ran the Altaddr command to specify the internal/external addresses I set up for the Citrix server, and added the entry to the ICA file. Finally,I have the Citrix XML services set to share the same port as IIS.
So, at this point I go out and try it from home, everything seems to be working great. However, in trying to access from inside the office, it doesn't work....not so great
I am trying to figure out where the problem might be occurring, but am having trouble visualizing the process. I have a feeling I am missing something on the firewall setup, but if anyone has any suggestions I would appreciate it.
TIA!