Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nfuse error accessing pub apps

Status
Not open for further replies.

zaneryrie

MIS
Apr 11, 2001
51
US
Hi All,

We have just finished installing nfuse and have published apps on 2 servers. We can load apps from one server via nfuse just fine. If we try to access apps from the other server we get the following error:

An error occurred on the MetaFrame server farm while attempting to complete the request. Error: unspecified

Any ideas? Thanks in advance.

zr
 
1. Check your licenses on the server that doesn't seem to work.
2. Check the correct port settings (both port 80 of the xml service) ?
3. Check that on the def. server XML service is running.
4. Are you using loadbalancing on the farm ? if so check that the drive mappings of the serverdrives are identical.
5. Can you ping the def. servers from the client ? If so can you telnet to the server ?
6. Is the firewall, if applicable, correctly configured. Reading your message I detect that, from a client you try to connect to two different servers. Are both servers known in the firewall ?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top