Nfuse and SSL Relay Problem?

[Person12]

I have the exact same problems as the people in these posts:

http://ctxex10.citrix.com/icaforum....1f24b1e862862a4f8525698400303005?OpenDocument

Here are the errors I get when I try and connect:

"There was an error:There was an error attempting to make a connection with the Citrix Relay Server. The name of the server to which the connection was attempted is XXX.XXX.XXX.XXX. The port number to which the connection was attempted is 443. Please ensure that there is a Citrix Relay Server installed on the machine with that address, and that it is listening on that port. Also ensure that the name contained in the server certificate that the Citrix Relay Server is configured to present matches exactly the name of the server to which the connection was attempted."


Does anyone have any ideas? The SSL Relay works fine if I use a Full Citrix Client and connect using a ICA connection (With the SSL/TLS + HTTPS protocol) but it will not work with Nfuse. I have seen many threads on the Citrix forum with the exact same symptoms but nobody ever posts how to fix them.

Does anyone have any ideas?

Thanks,

Eric

 

[Person12]

I fixed it. I had the .der file in the wrong place.

Thanks,

Eric

 

[dietcokebottle]

Hey Person12

What is the .der and where did you put it to fix the problem. I am asking so if other people get this problem they know what to do.