NFCR on DID is it possible?

[s3k]

friends
I have DID trunks pointing to the telco loop.
Can i configure access restrictions based on NCOS/NFCR on these trunks.
I had configured the same on TIE trunks and woring fine, but cant do this on DID trunks( MERL also says can't).
Is there any other way i can set it up?

What i did with TIE trunks was:
ld 15 enabled nfcr
ld 87 define ncos and associated with Frl
ld 49 made code Restriction tree
Ld 16 associated with an FRL.
ld 14 assign Cls TLD to trunks
ld 11 assign ncos and tld to extension

But we cant enable this for trunk type DID, is ther any other soloution on DIDs.



Think Globally, Act Locally

 

[mikeyb123]

try the nortel meridian systems forum

It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.