Nexer / ldk24 not start

[elziotech]

Hi..
i have a problem with Nexer / ldk 24, the system not start.

rs232 error:
--------------------------------------------
He100/He2xx Family Ethernet / USB boot v3.11

Network boot disabled: trying flash or UART

NBfs1Z
PP Boot 8.2.0.16 (25 June 2002)
Copyright (c) 2002 GlobespanVirata, Inc.
SDRAM size = 0x1000000
Flash boot failed.

Entered console ... No, or bad, ATMOS images.
------------------------------------------------
solution?

thank you bye!!
]

 

[doktor]

If you remove them (lcob, DSIV, slib,vmib) one-by-one, what happens?
Check the version of GDK-16 by [trans/pgm]+20 and post it here.
Check the types of the mentioned boards: lcob, DSIV, slib,vmib

Often there is not power enough for the ring generator to supply ringing voltage, if you overload the GDK-16.


///doktor

 

[doktor]

Sorry wrong answer was pasted here.

For the LDK-24 you need the verision 1.0 boot file.
To rescue the LDK-24 you need also the MFB. Check next reply.

///doktor

 

[doktor]

Use this link

http://www.kandu.dk/spg153996.aspx

///doktor

 

[elziotech]

ok but nexer write :
-------------------
Booting from Ethernet
boot
boot
boot
boot
boot
boot
----------------------
no start !!!!
why???

thank you

bye

 

[doktor]

It is like a PC, where the boot sector has been deleted or corrupted on the harddisk.
There is no boot-software available.
So you need to rescue the system. Use the link below to find my contact info:

http://www.kandu.dk/spg153996.aspx

I can send the description to you.

///doktor

 

[doktor]

To rescue the LDK-24 you need also the MFB-board.
Check description and image sent to you.

///doktor

 

[doktor]

Yes, you need to set up a PC as FTP server in a small network, and boot from this PC.

Then this:
-------------------
Booting from Ethernet
boot
boot
boot
boot
boot
boot
----------------------
Will look like :
Booting from Ethernet
boot
reply
IP 150.150.54.24
Server 150.150.54.36 ()
Booting '1.0Bc.bin'
................................................................
................................................................
................................................................

Done! (0x00390000 bytes)
++++
(if done correct it will take you 20 minutes).


///doktor

 

[doktor]

Any luck???

///doktor

 

[elziotech]

the lan interface is broken
i send the file bin with xmodem
nexer start but no answer to ping ( ip li in)

the nexer is now a paperweight

thank you

bye

 

[doktor]

OK. Can you change the IP address and ping the new IP address? Sometimes you had to do like this.
In Denmark on our "local" ebay web market, there are some LDK-24 for sale. Try

http://www.dba.dk

and use the search field(dansih:søg) to fin some. E.g. write LG LDK


///doktor

 

[elziotech]

or tried to change ip but nothing.

boot from lan no start
dead lan interface

http://www.dba.dk/telefoncentral-lg-nortel/id-87009850/

1.000 kr in euro?

thank you

 

[doktor]

1 Euro is 7,6 Danish krone (DKK). So 1000 DKK is 132 Euro. A good amd fair price.

///doktor