Hi could anyone help me, first here is my config
!
version 12.2
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname TEST
!
logging rate-limit console 10 except errors
enable password
!
!
pots country US
ip subnet-zero
!
no ip domain-lookup
no ip finger
no ip dhcp-client network-discovery
isdn switch-type basic-net3
!
!
!
interface Ethernet0
description connected to EthernetLAN
ip address 20.20.20.1 255.255.255.0
!
interface BRI0
description connected to CorporateNetwork
no ip address
encapsulation ppp
dialer rotary-group 1
isdn switch-type basic-net3
cdapi buffers regular 0
cdapi buffers raw 0
cdapi buffers large 0
no cdp enable
!
interface Dialer1
description connected to CorporateNetwork
ip address negotiated
encapsulation ppp
no ip split-horizon
dialer in-band
dialer string 02920200020
dialer hold-queue 10
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname
ppp chap password
ppp pap sent-username password
!
router rip
version 2
passive-interface Dialer1
network 20.0.0.0
no auto-summary
!
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
dialer-list 1 protocol ip permit
snmp-server community public RO
snmp-server chassis-id JAD05360FPH
!
line con 0
exec-timeout 0 0
password
login
transport input none
stopbits 1
line vty 0 4
password
login
!
no rcapi server
!
!
end!
I'm new to cli commands, i need to get this router (803) to dial a number to allow me test weather our box at the other end will answer, could someone tell me the commands to get it to dial? Also I live in the UK this confi was made with config maker, should pots country be UK or something?
!
version 12.2
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname TEST
!
logging rate-limit console 10 except errors
enable password
!
!
pots country US
ip subnet-zero
!
no ip domain-lookup
no ip finger
no ip dhcp-client network-discovery
isdn switch-type basic-net3
!
!
!
interface Ethernet0
description connected to EthernetLAN
ip address 20.20.20.1 255.255.255.0
!
interface BRI0
description connected to CorporateNetwork
no ip address
encapsulation ppp
dialer rotary-group 1
isdn switch-type basic-net3
cdapi buffers regular 0
cdapi buffers raw 0
cdapi buffers large 0
no cdp enable
!
interface Dialer1
description connected to CorporateNetwork
ip address negotiated
encapsulation ppp
no ip split-horizon
dialer in-band
dialer string 02920200020
dialer hold-queue 10
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname
ppp chap password
ppp pap sent-username password
!
router rip
version 2
passive-interface Dialer1
network 20.0.0.0
no auto-summary
!
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
!
dialer-list 1 protocol ip permit
snmp-server community public RO
snmp-server chassis-id JAD05360FPH
!
line con 0
exec-timeout 0 0
password
login
transport input none
stopbits 1
line vty 0 4
password
login
!
no rcapi server
!
!
end!
I'm new to cli commands, i need to get this router (803) to dial a number to allow me test weather our box at the other end will answer, could someone tell me the commands to get it to dial? Also I live in the UK this confi was made with config maker, should pots country be UK or something?