Newbie question

[Deftyone]

I'm trying to setup a 2610 that is on my home network so that I can access it from the outside world. I have the 2610 connected to a SOHO(D-Link) router. I can access the 2610 from any other device on the home network.

The 2610 e0 address is assigned as a DMZ host on the SOHO. I tried connected to another PC via DMZ and it works fine.

However, when I try to access the 2610 as a DMZ host from the outside world I'm seeing encapsulation failed while running debug ip packet on the 2610:


Mar 1 02:36:51.996: IP: s=192.168.1.254 (local), d=x.x.x.x (Ethernet0/0), len 44, sending
*Mar 1 02:36:51.996: IP: s=192.168.1.254 (local), d=x.x.x.x (Ethernet0/0), len 44, encapsulation failed

Can anyone point me in the right direction?

 

[tecnikall]

Hello there,

It may be an ARP issue trying to map a L2 Mac address to the L3 ip address, have a look at this info and troubleshooting steps:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6057.shtml

Just search for encapsulation faild within the page.

Cheers