New tty port on cske 5.5 1

[goosefraba]

Does anyone have knowledge of how to add a tty port for a 3rd party cdr system ?
Many thanks for your help.

 

[biv343]

Build the new TTY port off a MGC, add cty to the USR prompt, assuming you have a CS1000E with MGC cards. If not, build a TTY with CTY in the USR field.

ld 17
CHG
ADAN
NEW TTY x (enter the number of the TTY)
CTYP MGC
IPMG X X (put in the number of the MGC that the TTY is on, such as 0 0, 0 1, etc)
DNUM X (put in the device number)
PORT 1 (if using port 1 off the MGC cable)
DES CDR
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER CTY

 

[bigindian65]

It's in the NTP's Gooseneck.....

under CTYP of LD 17

MGC Enter MGC if the TTY is being configured on an
IPMG controlled by a MGC.
basic-5.0

Mato' Was'aka

 

[goosefraba]

Thanks biv that worked.