new to M1

[J4P]

Where to Start?
Familiar with compact ICS.
Now we have new department with Meridian 1, opt.11 or 21 ???
We have Administration x11 (3 books) .
Where do I START ??????

 

[FuzzyCub]

Global Knowledge

http://www.globalknowledge.com)

used to be the authorized trainer for Nortel products. Take the familiarization course and then maybe the Adds/Moves/Changes course.

 

[wolfi24]

Start with X11 Administration input/output Guide

Wolfi

 

[senk1s]

register with nortel and start downloading the manuals
(free registration) ...

start with software features guide ...which explains feature by feature, and what are the steps involved in programming and what are the interactions with other features ...(there are 3 volumes)

 

[billydbob]

I've been out of the field for a while. I was asked to add a M7310 phone to a Norstar Plus Compact ICS. It appears at the 66 bloc only the white blue is punched down. Last i worked digital sets 2 pair was required. Does anyone have the wire out for extensions? This is a 4X8 system with 4 extensions adding a fifth. Thanks

 

[johnpoole]

the 5th ext will go on the white slate pair, single pair have been the rule for a while.. it will come up with default ext and program... might try the norstar forum for better info..

john poole
bellsouth business
columbia,sc

 

[johnpoole]

can you log in? if so go to

ld 20
prt
dnb
0
xxxx (any ext)
return
through the rest of the prompts

then look at tn... the terminial number..

prt
tnb
x x first and last number in an 11 01 0 0 02.. is card 1
unit 2... the tnb is 1 2

return until it prints the set.. if the tn starts with 4,8,12,16 etc then the system is a 21(old) or larger

john poole
bellsouth business
columbia,sc